| Aquacare - Heat, Energy & Water Consultancy | Putting Your Energy To Better Use | .....................................................................

™

Home.Consultancy. Audits . How Can We Help You? .Who's Using Us? . Product Guide .Manage CO2 Emmissions .Contact Us

Control Valves

flowsmart

Flow-Smart® Control Valves

When constant water flow is required in sterilisers, tool sterilisers, apron and hand washers, hoses or chute washes use the Flow-Smart® Control Valve.
wafer
Wafer Control Valves

Where high flow rates are required the Wafer Control Valve is used to control the flow of water and other liquids.

Features of FlowSmart® Control Valves:

Features of Wafer Control Valves:

Large reduction in water volume used

Handles all water temperatures up to 100°C because of
EPDM inserts

Controls variable pressure to provide even flow over long
supply main

Standard type available to control flow from 0.4 - 114 litre
per minute

Quick and easy to install

Enquire now about Aquacare's Flow Control Valves

Handles temperatures up to 100°C

Designed to be mounted between Table "D" or "E" flanges
in pipework from 40-150mm (6") diameter depending on
your requirement

Controls flows from 233-2166 litres/minute

Available in stainless steel or brass

How do Wafer Control Valves work?

As the pressure in the pipeline increases, the flexible rubber ring rolls down the tapered orifice reducing the orifice size. The automatic reduction in orifice size ensure that the preset flowrate is maintained.


How do Wafer Control Valves work?
		As the pressure in the pipeline increases, the flexible rubber ring rolls down the tapered orifice reducing the orifice size. The automatic reduction in orifice size ensure that the preset flowrate is maintained.